Anti Etch Treatments
We provide a wide range of professional services to meet your needs. Marble and Limestone Worktops and Vanity Units suffer from acidic damgage which results in staining which cannot be cleaned off, we have a variety of solutions to deal with this
What can we do to protect your valuable marble worktops and vanity units
We have a few options, Richard was invited to become an ANTIETCH™ applicator but first had to go through training and be able to prove polishing of a high standard to become an approved applicator, this is the Gold standard and comes with a 10 year guarantee. We are also approved applicators of No Etch and Faber's Etch resistant sealer
Approved Applicator of MORE™ AntiEtch®
At Hampshire Hard Floor Care we are proud to be a certified applicator of the MORE™ AntiEtch® surface-protection system.
What this means for you
- MORE™ AntiEtch® is a market-leading, ultra-thin, invisible coating formulated for acid-sensitive stones such as marble, limestone, onyx, travertine and concrete. MORE Surface Care+1
- When applied correctly, it forms a durable barrier that prevents both etching (caused by acidic spills) and staining, while preserving the natural appearance of the stone. MORE Surface Care+1
- The system is backed by a lifetime or long-term warranty when installed by a certified applicator. MORE Surface Care+1
- Application requires specialist training and accreditation. Only certified applicators — like us — can install it to the correct specification and activate the full warranty. The Tile Master+1
Why choose MORE™ AntiEtch® through us
- We’ve completed the necessary training, product-handling and installation protocols to qualify as an approved applicator of the MORE™ system. (Training includes correct surface preparation, application, UV-curing, finishing and ongoing maintenance advice.)
- We tailor our service for Hampshire and surrounding areas, so you get a local expert with full accreditation, instead of a generic provider.
- After application, we provide you with aftercare guidance and the warranty documentation from MORE™ AntiEtch®, offering long-term peace of mind for your investment.
What we can protect
- Marble worktops, vanity surfaces and islands
- Acid-sensitive stone floors and wall panels (marble, limestone, travertine, onyx)
- Horizontal and vertical installations
- Polished, honed or leathered finishes
Simple next step
If your stone surfaces (especially kitchens or bathrooms) face regular exposure to acidic liquids (lemon juice, wine, soda, cleaning agents) and you want long-term protection without altering the look of the stone — let us survey your space, assess suitability, and advise whether MORE™ AntiEtch® is the right choice for you.
Certified Applicator of the No Etch® System
At Hard Floor Care we are proud to be certified applicators of the No Etch® system from TileMaster, a market-leading solution for acid-sensitive stone surfaces. According to TileMaster, the No Etch® system is a “durable coating for marble, limestone and travertine … that eliminates etching and staining” when correctly applied by certified professionals.
What this means for you
- The system is not a generic off-the-shelf sealer: it is restricted to use by accredited, trained applicators — like our team.
- It offers protection specifically for acid-sensitive stones (marble, limestone, travertine, onyx and similar) where standard impregnators are insufficient.
- The finish is clear and transparent, preserving the natural look of your stone while providing enhanced protection.
- As certified applicators, we are able to guarantee correct preparation, application, curing and after-care so you realise the full benefit of the system.
Why No Etch® is a strong choice for your stone
- Prevents etching: Acidic substances (lemon juice, wine, vinegar, certain cleaners) can instantly etch sensitive stone surfaces. The No Etch® system significantly reduces that risk.
- Stain resistance built in: While many sealers manage stains, No Etch® is designed to reduce both staining and etching concurrently.
- Versatile application: Suitable for polished, honed or leathered finishes, horizontal surfaces (like kitchen worktops and vanities) and vertical applications.
- Professional standard and warranty potential: Because it’s installed by certified professionals, you may benefit from a robust warranty or enhanced performance lifespan compared to DIY treatments.
How our service works
- Survey and assessment – We inspect your stone surface (finish, condition, any existing coatings, risk of acid exposure) and advise whether No Etch® is the right solution.
- Preparation – Any previous coatings are removed, the stone cleaned and prepared, so the No Etch® product can penetrate and bond correctly.
- Application – We apply the No Etch® in controlled conditions (correct coverage, dwell time, curing) to ensure maximum performance per manufacturer’s instructions.
- Curing & after-care – The surface is allowed to cure fully; we provide you with tailored maintenance advice to extend the life of the treatment.
- Peace of mind – With our certified installation, you get premium protection and the confidence of knowing the system is installed to correct standards.
Ideal Use-Cases for No Etch®
- Marble kitchen islands, worktops or splashbacks subject to acidic foods and liquids
- Travertine or limestone vanity tops where toiletries and cosmetics may contact the surface
- High-spec domestic or commercial environments where appearance must be maintained and damage minimised
- Heritage or luxury stone surfaces where maintaining original look + minimising risk are key
Marble Vanity units aboard Cunard Queen Elizabeth restored by us, video shows No Etch in action, acid is poured onto surface, where there is no protection there is reaction and the acid fizzes which is what causes the etching, whilst there is no reaction on the treated part
Certified Installer of Faber AS 930 CP – Advanced Anti-Etch & Stain Protection
We are proud to offer the Faber AS 930 CP system — a high-performance, single-component protective treatment designed specifically for stone surfaces that are vulnerable to acid etching and staining.
HF Flooring Supplies LTD+3Faber Surface Care+3Faber B2B+3
Here’s what it means and why it matters for your project.
What the system delivers
- Faber AS 930 CP is solvent-based and engineered for acid-sensitive materials such as marble, travertine and limestone. Faber Surface Care+2HF Flooring Supplies LTD+2
- It offers etch resistance (protecting against acidic spills that would otherwise damage or dull the stone) and stain resistance (helping guard against oil, beverages or everyday soiling) while maintaining a polished, natural finish. Faber Surface Care+1
- Importantly, it’s certified safe for surfaces in contact with food – making it ideal for kitchen islands, vanity tops and high-end worktops. HF Flooring Supplies LTD+1
- Coverage is approximately 15-20 m² per kg (for typical polished stone surfaces) when applied according to instructions. Faber Surface Care+1
Why this is a premium choice
Unlike standard sealers, which might guard against stains only, the Faber AS 930 CP system addresses the etching risk too — a key concern for sensitive stones. Plus, the finish remains natural (no “plastic” film build-up) and it remains stable over time (won’t yellow). Marble Corner+1
For homeowners, specifiers and commercial clients seeking stone surfaces that look great and stay protected in high-traffic or premium settings, this system represents a high-end solution — and when installed by a certified team, you gain maximum benefit.
Our Certification & Service Commitment
As your local Hampshire specialist, we are fully trained and experienced in the correct preparation and application protocols of the Faber AS 930 CP system. That means:
- Comprehensive stone-type assessment (polished finish, acid sensitivity)
- Correct surface cleaning, polishing and preparation prior to treatment
- Application within manufacturer’s specified “open-time”, drying and leveling phases so the protection performs long term. Flag stone Fix+1
- Post-application documentation, maintenance advice and support to maximise lifespan
By choosing us, you are selecting not just a specialist sealer, but a fully accredited installer who ensures the system is applied to its full potential — giving you better protection and peace of mind.
Ideal Use-Cases
This treatment is ideally suited for:
- Marble or limestone worktops, islands and vanity tops in kitchens or bathrooms
- Decorative wall panels or vertical stone installations where acid or staining risk is high
- High-spec residential or commercial stone surfaces where aesthetics, durability and long-term maintenance cost are key considerations
